Heterocyclic Building Blocks-Cinnoline

A common heterocyclic compound, 21905-86-2,Cinnoline-4-carboxylic acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 21905-86-2

EXAMPLE 5 n-Propyl Cinnoline-4-carboxylate (5) A suspension of 870 mg of 1, and 850 mg of carbonyidimidazole (CDII) in 30 ml of tetrahydrofuran (THF) was stirred at room temperature until CO2 evolution ceased (ca. 30 minutes). After being stirred for 2 hours, the resulting mixture was treated with 320 mg of dry nypropanol and 3 drops of a 0.1 M solution of sodium imidazole in THE. The mixture was held at room temperature overnight, then the solvent was evaporated and the residue was partitioned between water and ether. The etheral extract was washed with saturated sodium bicarbonate solution, then with brine, then dried (MgSO4) and stripped in a rotary evaporator. The residue was chromatographed over silica gel, using a 1:1 v:v mixture of cyclohexane and ethyl acetate as eluent, to give 5, as a yellow oil.

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,21905-86-2,Cinnoline-4-carboxylic acid,its application will become more common.

Reference£º
Patent; E. I. Du Pont de Nemours and Company; US4699651; (1987); A;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

Adding a certain compound to certain chemical reactions, such as: 318276-74-3,Methyl cinnoline-6-carboxylate, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 318276-74-3,318276-74-3

A solution of the compound from example 3d) (345 mg; 1.8 mmol.) in anhydrous tetrahydrofuran (20.0 ml_) was cooled to 5 oC for the portionwise addition of solid lithium aluminumhydride (70.0 mg; 1.8 mmol.) and stirred at 5 0C for 1 h. The mixture was quenched by the addition of ethyl acetate (50.0 ml_) then water (5.0 ml_), filtered through a pad of Celite and evaporated. The residue was dissolved in ethyl acetate (50.0 ml.) and treated with manganese dioxide (0.50 g) and stirred at room temperature for 2 h. The mixture was filtered through a pad of Celite and evaporated to afford the title compound (169 mg; 60%) as a brown powder which was used directly in the following step without further purification

According to the analysis of related databases, 318276-74-3, the application of this compound in the production field has become more and more popular.

Reference£º
Patent; SMITHKLINE BEECHAM CORPORATION; WO2007/103759; (2007); A2;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, greener environment, people will have to find innovative ways to maintain their relevance. Here is a downstream synthesis route of the compound 78593-33-6,78593-33-6

(a) 3-(4-Hydroxybenzenesulphonyl)cinnoline A mixture of 2.1 g (0.01 mol) of 3-bromocinnoline, 6.6 g (0.02 mol) of sodium 4-tosyloxybenzenesulphinate and 50 ml of dimethylsulphoxide was stirred and heated at 120 C. for 24 hours. The mixture was poured into water and extracted with dichloroethane. The dichloroethane solution was washed with water, dried on anhydrous sodium sulphate and filtered. The solvent was then evaporated with a rotatory evaporator to provide 2.5 g of an oily residue. The desired product was then isolated by chromatography on a silica column using dichlorethane/methanol 98/2. In this manner, 0.45 g of 3-(4-hydroxybenzenesulphonyl)cinnoline was obtained. Yield: 10.2%

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant.we look forward to future research findings about 78593-33-6.

Reference£º
Patent; Sanofi; US4994474; (1991); A;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials.78593-33-6,A new synthetic method of this compound is introduced below.78593-33-6

a) 3-(4-Hydroxybenzenesulphonyl)cinnoline A mixture of 2.1 g (0.01 mol) of 3-bromocinnoline, 6.6 g (0.02 mol) of sodium 4-tosyloxybenzenesulphinate and 50 ml of dimethylsulphoxide was stirred and heated at 120 C. for 24 hours. The mixture was poured into water and extracted with dichloroethane. The dichloroethane solution was washed with water, dried on anhydrous sodium sulphate and filtered. The solvent was then evaporated with a rotatory evaporator to provide 2.5 g of an oily residue. The desired product was then isolated by chromatography on a silica column using dichlorethane/methanol 98/2. In this manner, 0.45 g of 3-(4-hydroxybenzenesulphonyl)cinnoline was obtained. Yield: 10.2%

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 3-Bromocinnoline.

Reference£º
Patent; Sanofi; US5147878; (1992); A;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

Cinnoline-4-carboxylic acid, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.”21905-86-2

A solution of cinnoline-4-carboxylic acid (183 mg, 1.02 mmol) in methylene chloride (20 ml) was reacted with EDCI (195 mg, 1.02 mmol) and HOBt (138 mg, 1.02 mmol) for 20 min and then stirred, together with 4b-amino-9b-hydroxy-7-isopropyl-4b,9b-dihydro-5-oxa-indeno[2,1-a]-inden-10-one (250 mg, 0.85 mmol), overnight at room temperature. After extraction with methylene chloride and water, the organic layer was dried over MgSO4 and concentrated in a vacuum. Purification by column chromatography (ethylacetate:n-hexane=1:1) afforded the title compound as a white solid (290 mg, 63%). [0846] 1H-NMR (300 MHz, CD3OD) delta 1.15 (d, J=6.8 Hz, 6H, CH3), 2.82 (sep, J=6.8 Hz, 1H, CH), 6.69 (s, 1H, ArH), 6.89 (d, J=7.8 Hz, 1H, ArH), 7.45 (d, J=7.9 Hz, 1H, ArH), 7.65 (m, 1H, ArH), 7.858.03 (m, 5H, ArH) 8.42 (d, J=8.0 Hz, 1H, ArH), 8.51 (d, J=8.4 Hz, 1H, ArH), 9.45 (s, 1H, ArH)., 21905-86-2

The chemical industry reduces the impact on the environment during synthesis, Cinnoline-4-carboxylic acid, , I believe this compound will play a more active role in future production and life.

Reference£º
Patent; KATHOLIEKE UNIVERSITEIT LEUVEN K.U. LEUVEN R & D; KOREA RESEARCH INSTITUTE OF CHEMICAL TECHNOLOGY; Jung, Young Sik; Lee, Chong Kgo; Kim, Hae Soo; Jeong, Hee Chun; Kim, Pil Ho; Han, Soo Bong; Shin, Jin Soo; Neyts, Johan; Thibaut, Hendrik Jan; US2014/114068; (2014); A1;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.78593-33-6, 3-Bromocinnoline it is a common compound, a new synthetic route is introduced below.78593-33-6

a) 3-(4-Hydroxybenzenesulphonyl)cinnoline A mixture of 2.1 g (0.01 mol) of 3-bromocinnoline, 6.6 g (0.02 mol) of sodium 4-tosyloxybenzenesulphinate and 50 ml of dimethylsulphoxide was stirred and heated at 120 C. for 24 hours. The mixture was poured into water and extracted with dichloroethane. The dichloroethane solution was washed with water, dried on anhydrous sodium sulphate and filtered. The solvent was then evaporated with a rotatory evaporator to provide 2.5 g of an oily residue. The desired product was then isolated by chromatography on a silica column using dichlorethane/methanol 98/2. In this manner, 0.45 g of 3-(4-hydroxybenzenesulphonyl)cinnoline was obtained. Yield: 10.2%

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand 3-Bromocinnoline reaction routes.

Reference£º
Patent; Sanofi; US5147878; (1992); A;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

38024-35-0, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.”38024-35-0

To a suspension of 4-aminocinnoline-3-carboxamide (3.5 g, 18.60 mmol) in DCM (10 ml) was added POCI3 (43.3 ml, 465 mmol) followed by triethylamine (7.78 ml, 55.8 mmol). The mixture was refluxed for 7 h. The reaction was then allowed to cool to 11 and conc, in vacuo. The crude residuewas then carefully treated with saturated aqueous NaHCO3 at 0 C. A precipitate formed which was collected via vacuum filtration. The filter cake washed with water (-i00 ml,), collected, and driedvacuo to provide the title compound as a grey solid 4-aminocinnoiine-3-carbonitriie.

The chemical industry reduces the impact on the environment during synthesis, 38024-35-0, , I believe this compound will play a more active role in future production and life.

Reference£º
Patent; PI INDUSTRIES LTD.; SAXENA, Rohit; PANMAND, Deepak Shankar; JENA, Lalit Kumar; SRIVASTAVA, Khushboo; RAJU, Jella Rama; MANJUNATHA, Sulur G; SAMANTA, Jatin; GARG, Ruchi; AUTKAR, Santosh Shridhar; VENKATESHA, Hagalavadi M; GADAKH, Ramdas Balu; KLAUSENER, Alexander G. M.; POSCHARNY, Konstantin; (219 pag.)WO2018/116072; (2018); A1;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

21905-86-2, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.”21905-86-2

EXAMPLE 63f Synthesis of Cinnoline-4-carboxylic acid [2-((S)-2-imidazol-1-yl-1-pyridin-3-yl-ethoxy)-5-oxo-5,6,7,8-tetrahydro-naphthalen-1-yl]-amide (Compound 63f) The procedure in Example 63d step 3 was followed using cinnoline-4-carboxylic acid. The reaction was stirred at RT for 1 day and at reflux for 1 day. Purification by chromatography (SiO2, 5-8% MeOH/CH2Cl2 with 1% NH4OH) afforded the title compound as a foam (63 mg, 0.125 mmol, 44%). The structure was confirmed by NMR and mass spectrometry. MS m/z 505 (M++H).

The chemical industry reduces the impact on the environment during synthesis, 21905-86-2, , I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Denny, William Alexander; Hutchings, Richard H; Johnson, Douglas S; Kaltenbronn, James Stanely; Lee, Ho Huat; Leonard, Daniele Marie; Milbank, Jared Bruce John; Repine, Joseph Thomas; Rewcastle, Gordon William; White, Andrew David; US2004/44057; (2004); A1;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

In the chemical reaction process,reaction time,type of solvent,can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.An updated downstream synthesis route of 21905-86-2,Cinnoline-4-carboxylic acid, as follows.21905-86-2

EXAMPLE 42 2-(2-ethoxyethoxy)ethyl cinnoline-4-carboxylate (42) 1.07 g of CDIT was added to a mixture of 1.04 g of 1 in 70 ml of dry THF under nitrogen, the mixture was stirred at room temperature for 4 hours, 1.6 g of 2-(2-ethoxyethoxy)ethanol and 0.032 g of sodium methoxide were added and the mixture was stirred at room temperature over a weekend. Then the solvent was stripped, and the residue was dissolved in methylene chloride. The solution was washed with water, dried (MgSO4) and stripped of solvent. The residue was flash-chromatographed on silica gel, using a 1:4 v:v mixture of ethyl acetate and methylene chloride as eluent, to give 42, as a yellow oil.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. 21905-86-2, We look forward to the emergence of more reaction modes in the future.

Reference£º
Patent; E. I. Du Pont de Nemours and Company; US4699651; (1987); A;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

21905-86-2,A common heterocyclic compound, 21905-86-2,Cinnoline-4-carboxylic acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

EXAMPLE 42 2-(2-ethoxyethoxy)ethyl cinnoline-4-carboxylate (42) 1.07 g of CDIT was added to a mixture of 1.04 g of 1 in 70 ml of dry THF under nitrogen, the mixture was stirred at room temperature for 4 hours, 1.6 g of 2-(2-ethoxyethoxy)ethanol and 0.032 g of sodium methoxide were added and the mixture was stirred at room temperature over a weekend. Then the solvent was stripped, and the residue was dissolved in methylene chloride. The solution was washed with water, dried (MgSO4) and stripped of solvent. The residue was flash-chromatographed on silica gel, using a 1:4 v:v mixture of ethyl acetate and methylene chloride as eluent, to give 42, as a yellow oil.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand 21905-86-2 reaction routes.

Reference£º
Patent; E. I. Du Pont de Nemours and Company; US4699651; (1987); A;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics