Heterocyclic Building Blocks-Cinnoline

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.18514-84-6, Cinnolin-4(1H)-one it is a common compound, a new synthetic route is introduced below.18514-84-6

To a solution of cinnolin-4(lH)-one in DMF (0.1 M) was added K2CO3 (1.2 eq) and methyl 5-(bromomethyl)-2-fluorobenzoate (prepared as described in US 2007/0021427 Al, 1 eq). The mixture was stirred and heated tolOO 0C for Ih. After cooling to RT the solvent was removed under reduced pressure and the residue was partitioned between DCM and H2O. The organic phase was washed with brine, dried (Na2SO4) and filtered and the solvent was removed under reduced pressure. The product was isolated by flash chromatography on silicagel, using a gradient of DCM/MeOH (from 0% to 10% MeOH in 10 CV). The 2-[4-fiuoro-3- (methoxycarbonyl)benzyl]cinnolin-2-ium-4-olate was eluted after the title compound.MS (ES) Ci8Hi3FN2O3 requires: 312, found: 313 (M+H)+., 18514-84-6

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand Cinnolin-4(1H)-one reaction routes.

Reference£º
Patent; ISTITUTO DI RICERCHE DI BIOLOGIA MOLECOLARE P. ANGELETTI S.P.A.; WO2009/27730; (2009); A1;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

Cinnolin-4-ol, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 875-66-1

To a suspension of NaH (60% in mineral oil, 0.099 g, 2.46 mmol) in DMF (5 mL) was added cinnolin-4-ol (prepared from 2-aminoacetophenone according to the procedures described in U. S. Patent No. 4,620, 000), 0. 300 g, 2.05 mmol) in DMF (2 mL) dropwise. The reaction mixture was warmed at 40 C and stirred for 30 minutes. After cooling, N-phenyltrifluoromethanesulfonimide (0.880 g, 2.46 mmol) in DMF (2 mL) was added, and the reaction mixture was stirred at room temperature for 1 hour. 1-Boc piperazine (0.765 g, 4.11 mmol) was added to the mixture. The reaction was stirred at 80 C for 4 hours. After cooling, the mixture was partitioned between EtOAc and water. The aqueous phase was extracted with EtOAc. The combined organic layers were washed with water, brine, dried and concentrated. The residue was purified by column chromatography (1: 1 to 1: 3 hexanes/EtOAc) to give 4- Cinnolin-4-yl-piperazine-l-carboxylic acid tert-butyl ester (0.246 g, 38%) as a yellow oil. 1H NMR (CDC13, 400 MHz) 8 8. 91 (s, 1H), 8. 47 (d, J= 8.4 Hz, 1H), 7.97 (d, J= 8. 4 Hz, 1H), 7.80 (t, J= 7.2 Hz, 1H), 7.69 (t, J= 7.2 Hz, 1H), 3.74 (m, 4H), 3. 34 (m, 4H), 1.51 (s, 9H). LCMS (APCI+) tnlz 315 [M+H]’ ; Rt = 2.14 minutes.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand Cinnolin-4-ol reaction routes.

Reference£º
Patent; ARRAY BIOPHARMA INC.; WO2005/51304; (2005); A2;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

21905-86-2, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 21905-86-2

EXAMPLE 5 n-Propyl Cinnoline-4-carboxylate (5) A suspension of 870 mg of 1, and 850 mg of carbonyidimidazole (CDII) in 30 ml of tetrahydrofuran (THF) was stirred at room temperature until CO2 evolution ceased (ca. 30 minutes). After being stirred for 2 hours, the resulting mixture was treated with 320 mg of dry nypropanol and 3 drops of a 0.1 M solution of sodium imidazole in THE. The mixture was held at room temperature overnight, then the solvent was evaporated and the residue was partitioned between water and ether. The etheral extract was washed with saturated sodium bicarbonate solution, then with brine, then dried (MgSO4) and stripped in a rotary evaporator. The residue was chromatographed over silica gel, using a 1:1 v:v mixture of cyclohexane and ethyl acetate as eluent, to give 5, as a yellow oil.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand Cinnoline-4-carboxylic acid reaction routes.

Reference£º
Patent; E. I. Du Pont de Nemours and Company; US4699651; (1987); A;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

78593-33-6, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 78593-33-6

Using the same procedure as that described above but from 3-bromocinnoline there was obtained 3-(4-methoxyphenylthio)cinnoline Yield: 74.6% M.P.: 108 C. (isopropanol)

The chemical industry reduces the impact on the environment during synthesis, 3-Bromocinnoline, , I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Sanofi; US4994474; (1991); A;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

875-66-1,Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials.875-66-1,A new synthetic method of this compound is introduced below.

875-66-1, a. 4-Chloro-8-nitroquinoline (6a). This intermediate was prepared from 4-chloroquinoline (obtained by treating 4-hydroxyquinoline with [POC13] as [ DESCRIBED BY GOULEY, R. W., ET AL. , J. AMER. CHEM. SOC., 1947, 69, 303-306.4-] Chloroquinoline (10.0 g, 61.3 mmol) was added in small portions to sulfuric acid (45 mL) taking care to maintain the temperature at or below 15 C. Then the solution was cooled and maintained at-15 C during the addition of fuming nitric acid (9 mL). The mixture was allowed to warm to room temperature and stirred for an additional 3 hours. The reaction mix was poured on ice and basified (pH 9) with NH40H. The resulting precipitate was filtered, washed well with water, dried, and recrystallized from methanol to provide 7.5 g of 6a, in 59 % yield; m. p. = [128-129 C] (lit. m. p. = [129-130 C) ; IH] NMR [(CDC13)] [8] 7.67 (d, [1H,] J=4. 5), 7.75 (dd, 1H, J=8. 6 [HZ,] J=7. 6), 8.10 (dd, 1H, J=7. 6, J=1. 3), 8. 48 (dd, 1H,. [J=8.] [6,] J=1.3), 8.94 (d, 1H, J=4. 5); [13C] NMR [(CDC13)] [8] 123.0, 124.4, 126.5, 127.5, 128.3, 140.6, 143.2, 148.7, 152.1.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, Cinnolin-4-ol.

Reference£º
Patent; RUTGERS, THE STATE UNIVERSITY; LAVOIE, Edmond, J.; RUCHELMAN, Alexander, L.; LIU, Leroy, F.; WO2004/14906; (2004); A2;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 21905-86-2,Cinnoline-4-carboxylic acid, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.21905-86-2

To a solution OF 4- [ (Z)- (4-BROMOPHENYL) (ethoxyimino) methyl]-1- (4-methyl-4- piperidinyl) piperidine (50 mg, 0.12 MMOL), cinnoline-4-carboxylic acid (25mg, 0.14 mmol), Et3N (0.06 mL, 0.43 MMOL) in DMF (3 mL, anhydrous) was added HATU (60mg, 0. 16MMOL) at room temperature. After 16 h the reaction mixture was poured into ice water, and the solid was collected by filtration. The solid was dissolved in CH2CI2, and dried over NA2SO4. Concentration in vacuo, and purification by preparative TLC (CH2CI2-MEOH, 9: 1) afforded the title compound as a light yellow powder. MS: 564 (M+).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, Cinnoline-4-carboxylic acid.

Reference£º
Patent; SCHERING AKTIENGESELLSCHAFT; WO2004/113323; (2004); A1;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

18514-84-6,A common heterocyclic compound, 18514-84-6,Cinnolin-4(1H)-one, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

Intermediate 2: Preparation of 3-Bromo-l,4-dihydro-4-cinnolinone:Bromine (0.8 ml) in acetic acid (10 ml) was added to a mixture of cinnolin-4- one (1.5 g, 10.27 mmol), sodium acetate (1.51 g, 18.49 mmol) and acetic acid (15 ml) maintained at 100 0C and stirred at that temperature for Ih. The mixture was concentrated under reduced pressure to half the initial volume and poured into water. The precipitated solid was filtered, washed with water and dried under reduced pressure. Yield: 64%. 1H-NMR (delta ppm, CDCl3, 300 MHz): 13.87 (br. s, IH); 8.06 (d, J = 7.8, IH); 7.84-7.80 (m, IH); 7.61 (d, J = 8.7, IH); 7.49 (t, J = 7.8, IH).

The chemical industry reduces the impact on the environment during synthesis, 18514-84-6,Cinnolin-4(1H)-one,I believe this compound will play a more active role in future production and life.

Reference£º
Patent; GLENMARK PHARMACEUTICALS, S.A.; WO2009/53799; (2009); A1;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

38024-35-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.38024-35-0,4-Aminocinnoline-3-carboxamide, it is a common compound, a new synthetic route is introduced below.

To a suspension of 4-aminocinnoline-3-carboxamide (3.5 g, 18.60 mmol) in DCM (10 ml) was added POCI3 (43.3 ml, 465 mmol) followed by triethylamine (7.78 ml, 55.8 mmol). The mixture was refluxed for 7 h. The reaction was then allowed to cool to 11 and conc, in vacuo. The crude residuewas then carefully treated with saturated aqueous NaHCO3 at 0 C. A precipitate formed which was collected via vacuum filtration. The filter cake washed with water (-i00 ml,), collected, and driedvacuo to provide the title compound as a grey solid 4-aminocinnoiine-3-carbonitriie., 38024-35-0

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 38024-35-0, other downstream synthetic routes, hurry up and to see.

Reference£º
Patent; PI INDUSTRIES LTD.; SAXENA, Rohit; PANMAND, Deepak Shankar; JENA, Lalit Kumar; SRIVASTAVA, Khushboo; RAJU, Jella Rama; MANJUNATHA, Sulur G; SAMANTA, Jatin; GARG, Ruchi; AUTKAR, Santosh Shridhar; VENKATESHA, Hagalavadi M; GADAKH, Ramdas Balu; KLAUSENER, Alexander G. M.; POSCHARNY, Konstantin; (219 pag.)WO2018/116072; (2018); A1;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

875-66-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.875-66-1,Cinnolin-4-ol, it is a common compound, a new synthetic route is introduced below.

To a suspension of NaH (60% in mineral oil, 0.099 g, 2.46 mmol) in DMF (5 mL) was added cinnolin-4-ol (prepared from 2-aminoacetophenone according to the procedures described in U. S. Patent No. 4,620, 000), 0. 300 g, 2.05 mmol) in DMF (2 mL) dropwise. The reaction mixture was warmed at 40 C and stirred for 30 minutes. After cooling, N-phenyltrifluoromethanesulfonimide (0.880 g, 2.46 mmol) in DMF (2 mL) was added, and the reaction mixture was stirred at room temperature for 1 hour. 1-Boc piperazine (0.765 g, 4.11 mmol) was added to the mixture. The reaction was stirred at 80 C for 4 hours. After cooling, the mixture was partitioned between EtOAc and water. The aqueous phase was extracted with EtOAc. The combined organic layers were washed with water, brine, dried and concentrated. The residue was purified by column chromatography (1: 1 to 1: 3 hexanes/EtOAc) to give 4- Cinnolin-4-yl-piperazine-l-carboxylic acid tert-butyl ester (0.246 g, 38%) as a yellow oil. 1H NMR (CDC13, 400 MHz) 8 8. 91 (s, 1H), 8. 47 (d, J= 8.4 Hz, 1H), 7.97 (d, J= 8. 4 Hz, 1H), 7.80 (t, J= 7.2 Hz, 1H), 7.69 (t, J= 7.2 Hz, 1H), 3.74 (m, 4H), 3. 34 (m, 4H), 1.51 (s, 9H). LCMS (APCI+) tnlz 315 [M+H]’ ; Rt = 2.14 minutes.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand Cinnolin-4-ol reaction routes.

Reference£º
Patent; ARRAY BIOPHARMA INC.; WO2005/51304; (2005); A2;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

In the chemical reaction process,reaction time,type of solvent,can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.An updated downstream synthesis route of 875-66-1,Cinnolin-4-ol, as follows.875-66-1

Cinnolin-4(1H)-one (5.0 g, 34.24 mol) was added to the K2CO3 ( 7.08 g, 51.36 mol) and 3- bromoprop-1-yne (3.11 mL, 41.09 mol) in ACN (20 mL) and the mixture stirred at 80 C for 4-8 h then reaction mixture was cool to rt. The mixture was concentrated, diluted with H2O (30 mL), and extracted with EtOAc (3 ¡Á 50 mL). The combined organic layers were dried (MgSO4), filtered and concentrated. Flash chromatography gave 4-(prop-2-yn-1-yloxy)cinnoline (13a). Synthesis of 4-(prop-2-yn-1-yloxy)cinnoline (4a). Yield (2.60 g, 65.5%). m.p. 100-110 C. Colourless solid.1H NMR (400 MHz, CDCl3) delta 8.34 (dd, J = 1.2, 1.2 Hz, 1H, Ar), 7.81-7.77 (m, 2H, Ar), 7.60 (d, J = 8.8 Hz, 1H, Ar), 7.46 (t, J = 8.0 Hz,1H, Ar), 5.14 (d, J = 2.4 Hz, 1H, -OCH2), 2.51 (t, J = 2.4 Hz, 1H, Alky). 13C NMR (100 MHz, CDCl3) delta 171.2, 140.6, 140.1, 134.0, 126.0, 125.2, 124.6, 115.1, 76.0, 75.7, 46.2. ESI-MS: m/z 185.27 [M+H]+. Anal. Calc. (C11H8N2O) C: 71.73; H: 4.38; N: 15.21. Found C: 71.80; H: 4.04; N: 15.28%.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. 875-66-1, We look forward to the emergence of more reaction modes in the future.

Reference£º
Article; Boda, Sathish Kumar; Bommagani, Mohan Babu; Chitneni, Prasad Rao; Mokenapelli, Sudhakar; Yerrabelli, Jayaprakash Rao; Synthetic Communications; (2020);,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics