Heterocyclic Building Blocks-Cinnoline

Little discovery in the laboratory: a new route for Cinnolin-4-ol

In every case, we must determine the overall rate law from experimental data and deduce the mechanism from the rate law (and sometimes from other data). you can also browse my other articles about Cinnolin-4-ol, CAS: 875-66-1, if you are interested.

875-66-1, Rate laws may be derived directly from the chemical equations for elementary reactions. This is not the case, however, for ordinary chemical reactions.875-66-1, name is Cinnolin-4-ol, below Introduce a new synthetic route as follows.

a. [4-CHLOROCINNOLINE] (9b). A mixture of 4-hydroxycinnoline (2.0 g, 13.7 mmol), phosphorus oxychloride (1.94 mL, 20.5 mmol), and pyridine (0.33 mL, 4.1 mmol) in [CHLOROBENZENE] (50 mL) was refluxed for 1 hour. Then the mixture was cooled and the solvent evaporated under vacuum, water was added, and the mixture was neutralized with solid sodium bicarbonate and extracted with chloroform (3 x 100 mL), washed with water (3 x 100 mL), dried [(MGS04)] and evaporated under vacuum, giving 1.84 g, in 82 % yield; [MP] [76-77 C] (lit mp 78 [C)] [; IH] NMR [(CDC13)] [8] 7.91 (m, 2H), 8.20 (dd, 1H, [J=6.] 2, [J=2.] 1), 8.57 (dd, 1H, J=6. 6, J=1. 8), 9.34 (s, [1H)] ; [13C NMR (CDCL3) No. ] 123.0, 124.9, 130.2, 131.6, 132.3, 133.8, 134.9, 144.4.

Reference£º
Patent; RUTGERS, THE STATE UNIVERSITY; LAVOIE, Edmond, J.; RUCHELMAN, Alexander, L.; LIU, Leroy, F.; WO2004/14906; (2004); A2;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

Little discovery in the laboratory: a new route for 875-66-1

To a suspension of NaH (60% in mineral oil, 0.099 g, 2.46 mmol) in DMF (5 mL) was added cinnolin-4-ol (prepared from 2-aminoacetophenone according to the procedures described in U. S. Patent No. 4,620, 000), 0. 300 g, 2.05 mmol) in DMF (2 mL) dropwise. The reaction mixture was warmed at 40 C and stirred for 30 minutes. After cooling, N-phenyltrifluoromethanesulfonimide (0.880 g, 2.46 mmol) in DMF (2 mL) was added, and the reaction mixture was stirred at room temperature for 1 hour. 1-Boc piperazine (0.765 g, 4.11 mmol) was added to the mixture. The reaction was stirred at 80 C for 4 hours. After cooling, the mixture was partitioned between EtOAc and water. The aqueous phase was extracted with EtOAc. The combined organic layers were washed with water, brine, dried and concentrated. The residue was purified by column chromatography (1: 1 to 1: 3 hexanes/EtOAc) to give 4- Cinnolin-4-yl-piperazine-l-carboxylic acid tert-butyl ester (0.246 g, 38%) as a yellow oil. 1H NMR (CDC13, 400 MHz) 8 8. 91 (s, 1H), 8. 47 (d, J= 8.4 Hz, 1H), 7.97 (d, J= 8. 4 Hz, 1H), 7.80 (t, J= 7.2 Hz, 1H), 7.69 (t, J= 7.2 Hz, 1H), 3.74 (m, 4H), 3. 34 (m, 4H), 1.51 (s, 9H). LCMS (APCI+) tnlz 315 [M+H]’ ; Rt = 2.14 minutes.

Reference£º
Patent; ARRAY BIOPHARMA INC.; WO2005/51304; (2005); A2;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

Fun Route: New Discovery of Cinnoline-4-carboxylic acid

There are, however, a few established termolecular elementary reactions. The reaction of nitric oxide with oxygen appears to involve termolecular steps. you can also browse my other articles about Cinnoline-4-carboxylic acid, CAS: 21905-86-2

21905-86-2, Rate laws may be derived directly from the chemical equations for elementary reactions. This is not the case, however, for ordinary chemical reactions.21905-86-2, name is Cinnoline-4-carboxylic acid, below Introduce a new synthetic route.

A solution of cinnoline-4-carboxylic acid (183 mg, 1.02 mmol) in methylene chloride (20 ml) was reacted with EDCI (195 mg, 1.02 mmol) and HOBt (138 mg, 1.02 mmol) for 20 min and then stirred, together with 4b-amino-9b-hydroxy-7-isopropyl-4b,9b-dihydro-5-oxa-indeno[2,1-a]-inden-10-one (250 mg, 0.85 mmol), overnight at room temperature. After extraction with methylene chloride and water, the organic layer was dried over MgSO4 and concentrated in a vacuum. Purification by column chromatography (ethylacetate:n-hexane=1:1) afforded the title compound as a white solid (290 mg, 63%). [0846] 1H-NMR (300 MHz, CD3OD) delta 1.15 (d, J=6.8 Hz, 6H, CH3), 2.82 (sep, J=6.8 Hz, 1H, CH), 6.69 (s, 1H, ArH), 6.89 (d, J=7.8 Hz, 1H, ArH), 7.45 (d, J=7.9 Hz, 1H, ArH), 7.65 (m, 1H, ArH), 7.858.03 (m, 5H, ArH) 8.42 (d, J=8.0 Hz, 1H, ArH), 8.51 (d, J=8.4 Hz, 1H, ArH), 9.45 (s, 1H, ArH).

Reference£º
Patent; KATHOLIEKE UNIVERSITEIT LEUVEN K.U. LEUVEN R & D; KOREA RESEARCH INSTITUTE OF CHEMICAL TECHNOLOGY; Jung, Young Sik; Lee, Chong Kgo; Kim, Hae Soo; Jeong, Hee Chun; Kim, Pil Ho; Han, Soo Bong; Shin, Jin Soo; Neyts, Johan; Thibaut, Hendrik Jan; US2014/114068; (2014); A1;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

Derivation of elementary reaction about Cinnolin-4(1H)-one

Any one of these steps may be slow and thus may serve as the rate determining step. In general, however, in the presence of the catalyst, the overall rate of the reaction is faster than it would be if the reactants were in the gas or liquid phase.Cinnolin-4(1H)-one, CAS: 18514-84-6, if you are interested, you can browse my other articles.

Rate laws may be derived directly from the chemical equations for elementary reactions. This is not the case, however, for ordinary chemical reactions.18514-84-6, name is Cinnolin-4(1H)-one, below Introduce a new synthetic route as follows., 18514-84-6

To a solution of cinnolin-4(lH)-one in DMF (0.1 M) was added K2CO3 (1.2 eq) and methyl 5-(bromomethyl)-2-fluorobenzoate (prepared as described in US 2007/0021427 Al, 1 eq). The mixture was stirred and heated tolOO 0C for Ih. After cooling to RT the solvent was removed under reduced pressure and the residue was partitioned between DCM and H2O. The organic phase was washed with brine, dried (Na2SO4) and filtered and the solvent was removed under reduced pressure. The product was isolated by flash chromatography on silicagel, using a gradient of DCM/MeOH (from 0% to 10% MeOH in 10 CV). The 2-[4-fiuoro-3- (methoxycarbonyl)benzyl]cinnolin-2-ium-4-olate was eluted after the title compound.MS (ES) Ci8Hi3FN2O3 requires: 312, found: 313 (M+H)+.

Reference£º
Patent; ISTITUTO DI RICERCHE DI BIOLOGIA MOLECOLARE P. ANGELETTI S.P.A.; WO2009/27730; (2009); A1;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

Derivation of elementary reaction about 3-Bromocinnoline

Any one of these steps may be slow and thus may serve as the rate determining step. In general, however, in the presence of the catalyst, the overall rate of the reaction is faster than it would be if the reactants were in the gas or liquid phase.3-Bromocinnoline, CAS: 78593-33-6, if you are interested, you can browse my other articles.

Rate laws may be derived directly from the chemical equations for elementary reactions. This is not the case, however, for ordinary chemical reactions.78593-33-6, name is 3-Bromocinnoline, below Introduce a new synthetic route as follows., 78593-33-6

(a) 3-(4-Hydroxybenzenesulphonyl)cinnoline A mixture of 2.1 g (0.01 mol) of 3-bromocinnoline, 6.6 g (0.02 mol) of sodium 4-tosyloxybenzenesulphinate and 50 ml of dimethylsulphoxide was stirred and heated at 120 C. for 24 hours. The mixture was poured into water and extracted with dichloroethane. The dichloroethane solution was washed with water, dried on anhydrous sodium sulphate and filtered. The solvent was then evaporated with a rotatory evaporator to provide 2.5 g of an oily residue. The desired product was then isolated by chromatography on a silica column using dichlorethane/methanol 98/2. In this manner, 0.45 g of 3-(4-hydroxybenzenesulphonyl)cinnoline was obtained. Yield: 10.2%.

Any one of these steps may be slow and thus may serve as the rate determining step. In general, however, in the presence of the catalyst, the overall rate of the reaction is faster than it would be if the reactants were in the gas or liquid phase.3-Bromocinnoline, CAS: 78593-33-6, if you are interested, you can browse my other articles.

Reference£º
Patent; Sanofi; US5017579; (1991); A;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

Flexible application of Cinnolin-4-ol in synthetic route

A balanced equation for a chemical reaction indicates what is reacting and what is produced, but it reveals nothing about how the reaction actually takes place. The reaction mechanism is the process, or pathway, by which a reaction occurs.875-66-1, name is Cinnolin-4-ol. An updated downstream synthesis route of ¡¾CAS¡¿ as follows., 875-66-1

875-66-1, Example 20: Synthesis of 1- [4- (5-FLUORO-2-METHOXYPHENYL)-2-HYDROXY-4-METHYL-2- TRIFLUOROMETHYLPENTYL]-LH-CINNOLIN-4-ONE To a suspension of 2- [2- (5-fluoro-2-methoxyphenyl)-2-methylpropyl]-2-trifluoromethyloxirane (216 mg) and cinnolin-4-ol (V. G. Chapoulaud et AL., Tetrahedron, 2000,56, pp. 5499-5507) (216 mg) in anhydrous ethanol (1.2 ML) was added sodium ethoxide (21 wt. % solution in ethanol, 276 PL). After heating at 85C for 16 hours, the reaction mixture was diluted with ethyl acetate, dried over sodium sulfate, filtered, and concentrated in vacuo. The residue was purified by preparative TLC (eluted with 40% ethyl acetate-hexanes) to give the title compound as a pale yellow solid (26 mg), m. p. 122C-123C.

Reference£º
Patent; BOEHRINGER INGELHEIM PHARMACEUTICALS, INC.; WO2004/63163; (2004); A1;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

Derivation of elementary reaction about Cinnoline-4-carboxylic acid

Any one of these steps may be slow and thus may serve as the rate determining step. In general, however, in the presence of the catalyst, the overall rate of the reaction is faster than it would be if the reactants were in the gas or liquid phase.Cinnoline-4-carboxylic acid, CAS: 21905-86-2, if you are interested, you can browse my other articles.

Rate laws may be derived directly from the chemical equations for elementary reactions. This is not the case, however, for ordinary chemical reactions.21905-86-2, name is Cinnoline-4-carboxylic acid, below Introduce a new synthetic route as follows., 21905-86-2

10764] To a stirred solution of N1-cyclopropyl-5-fluo- robenzene-1,2-diamine mt-i (500 mg, 3.01 mmol) in DMF (5 mE) under an inert atmosphere was added cinnoline-4- carboxylic acid (524 mg, 3.01 mmol), HATU (1.71 g, 4.51 mmol) and diisopropylethylamine (1 mE, 6.02 mmol) at 00 C. The reaction mixture was stirred at room temperature for 16 h. Afier consumption of starting material (by TEC), the reaction mixture was diluted with water (20 mE) and extracted with EtOAc (2×20 mE). The combined organic extracts were washed with water (20 mE), dried over anhydrous Na2SO4 and concentrated under reduced pressure to obtain N-(2-(cyclopropylamino)-4-fluorophenyl) cinnoline4-carboxamide (500 mg, crude) as brown solid used in the next step without further purification.10765] EC-MS: m/z 322.9 [M+H] at 2.71 RT (38.30% purity).

Any one of these steps may be slow and thus may serve as the rate determining step. In general, however, in the presence of the catalyst, the overall rate of the reaction is faster than it would be if the reactants were in the gas or liquid phase.Cinnoline-4-carboxylic acid, CAS: 21905-86-2, if you are interested, you can browse my other articles.

Reference£º
Patent; Viamet Pharmaceuticals (NC), Inc.; Sparks, Steven; Yates, Christopher M.; Shaver, Sammy R.; Hoekstra, William J.; (156 pag.)US2018/185362; (2018); A1;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

Little discovery in the laboratory: a new route for 21905-86-2

EXAMPLE 5 n-Propyl Cinnoline-4-carboxylate (5) A suspension of 870 mg of 1, and 850 mg of carbonyidimidazole (CDII) in 30 ml of tetrahydrofuran (THF) was stirred at room temperature until CO2 evolution ceased (ca. 30 minutes). After being stirred for 2 hours, the resulting mixture was treated with 320 mg of dry nypropanol and 3 drops of a 0.1 M solution of sodium imidazole in THE. The mixture was held at room temperature overnight, then the solvent was evaporated and the residue was partitioned between water and ether. The etheral extract was washed with saturated sodium bicarbonate solution, then with brine, then dried (MgSO4) and stripped in a rotary evaporator. The residue was chromatographed over silica gel, using a 1:1 v:v mixture of cyclohexane and ethyl acetate as eluent, to give 5, as a yellow oil.

Reference£º
Patent; E. I. Du Pont de Nemours and Company; US4699651; (1987); A;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

Little discovery in the laboratory: a new route for 875-66-1

Cinnolin-4(1H)-one (5.0 g, 34.24 mol) was added to the K2CO3 ( 7.08 g, 51.36 mol) and 3- bromoprop-1-yne (3.11 mL, 41.09 mol) in ACN (20 mL) and the mixture stirred at 80 C for 4-8 h then reaction mixture was cool to rt. The mixture was concentrated, diluted with H2O (30 mL), and extracted with EtOAc (3 ¡Á 50 mL). The combined organic layers were dried (MgSO4), filtered and concentrated. Flash chromatography gave 4-(prop-2-yn-1-yloxy)cinnoline (13a). Synthesis of 4-(prop-2-yn-1-yloxy)cinnoline (4a). Yield (2.60 g, 65.5%). m.p. 100-110 C. Colourless solid.1H NMR (400 MHz, CDCl3) delta 8.34 (dd, J = 1.2, 1.2 Hz, 1H, Ar), 7.81-7.77 (m, 2H, Ar), 7.60 (d, J = 8.8 Hz, 1H, Ar), 7.46 (t, J = 8.0 Hz,1H, Ar), 5.14 (d, J = 2.4 Hz, 1H, -OCH2), 2.51 (t, J = 2.4 Hz, 1H, Alky). 13C NMR (100 MHz, CDCl3) delta 171.2, 140.6, 140.1, 134.0, 126.0, 125.2, 124.6, 115.1, 76.0, 75.7, 46.2. ESI-MS: m/z 185.27 [M+H]+. Anal. Calc. (C11H8N2O) C: 71.73; H: 4.38; N: 15.21. Found C: 71.80; H: 4.04; N: 15.28%.

Reference£º
Article; Boda, Sathish Kumar; Bommagani, Mohan Babu; Chitneni, Prasad Rao; Mokenapelli, Sudhakar; Yerrabelli, Jayaprakash Rao; Synthetic Communications; (2020);,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

Fun Route: New Discovery of 3-Bromocinnoline

78593-33-6, Rate laws may be derived directly from the chemical equations for elementary reactions. This is not the case, however, for ordinary chemical reactions.78593-33-6, name is 3-Bromocinnoline, below Introduce a new synthetic route.

Reference£º
Patent; Sanofi; US4994474; (1991); A;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics