Category: cinnoline

18514-84-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Cinnolin-4(1H)-one, cas is 18514-84-6,the cinnoline compound, it is a common compound, a new synthetic route is introduced below.

Intermediate 2: Preparation of 3-Bromo-l,4-dihydro-4-cinnolinone:Bromine (0.8 ml) in acetic acid (10 ml) was added to a mixture of cinnolin-4- one (1.5 g, 10.27 mmol), sodium acetate (1.51 g, 18.49 mmol) and acetic acid (15 ml) maintained at 100 0C and stirred at that temperature for Ih. The mixture was concentrated under reduced pressure to half the initial volume and poured into water. The precipitated solid was filtered, washed with water and dried under reduced pressure. Yield: 64%. 1H-NMR (delta ppm, CDCl3, 300 MHz): 13.87 (br. s, IH); 8.06 (d, J = 7.8, IH); 7.84-7.80 (m, IH); 7.61 (d, J = 8.7, IH); 7.49 (t, J = 7.8, IH).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Cinnolin-4(1H)-one, 18514-84-6

Reference£º
Patent; GLENMARK PHARMACEUTICALS, S.A.; WO2009/53799; (2009); A1;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

875-66-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Cinnolin-4-ol, cas is 875-66-1,the cinnoline compound, it is a common compound, a new synthetic route is introduced below.

a. 4-Chloro-8-nitroquinoline (6a). This intermediate was prepared from 4-chloroquinoline (obtained by treating 4-hydroxyquinoline with [POC13] as [ DESCRIBED BY GOULEY, R. W., ET AL. , J. AMER. CHEM. SOC., 1947, 69, 303-306.4-] Chloroquinoline (10.0 g, 61.3 mmol) was added in small portions to sulfuric acid (45 mL) taking care to maintain the temperature at or below 15 C. Then the solution was cooled and maintained at-15 C during the addition of fuming nitric acid (9 mL). The mixture was allowed to warm to room temperature and stirred for an additional 3 hours. The reaction mix was poured on ice and basified (pH 9) with NH40H. The resulting precipitate was filtered, washed well with water, dried, and recrystallized from methanol to provide 7.5 g of 6a, in 59 % yield; m. p. = [128-129 C] (lit. m. p. = [129-130 C) ; IH] NMR [(CDC13)] [8] 7.67 (d, [1H,] J=4. 5), 7.75 (dd, 1H, J=8. 6 [HZ,] J=7. 6), 8.10 (dd, 1H, J=7. 6, J=1. 3), 8. 48 (dd, 1H,. [J=8.] [6,] J=1.3), 8.94 (d, 1H, J=4. 5); [13C] NMR [(CDC13)] [8] 123.0, 124.4, 126.5, 127.5, 128.3, 140.6, 143.2, 148.7, 152.1.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Cinnolin-4-ol, 875-66-1

Reference£º
Patent; RUTGERS, THE STATE UNIVERSITY; LAVOIE, Edmond, J.; RUCHELMAN, Alexander, L.; LIU, Leroy, F.; WO2004/14906; (2004); A2;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

875-66-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Cinnolin-4-ol, cas is 875-66-1,the cinnoline compound, it is a common compound, a new synthetic route is introduced below.

(0509) Compound 110 (292 mg, 2.00 mmol) was refluxed in POCl3 overnight. It was cooled to room temperature and poured into ice water, neutralized with Na2C03. The precipitation was filtered out and washed with water, dried by pulling air through. Product was obtained as light yellow solid. (0510) (243mg, 74%). 1H NMR (400 MHz, chloroform-i/) delta 9.35 (s, 1H), 8.57 (ddd, J= 8.5, 1.4, 0.7 Hz, 1H), 8.20 (ddd, J= 8.2, 1.6, 0.7 Hz, 1H), 7.97 – 7.83 (m, 2H).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Cinnolin-4-ol, 875-66-1

Reference£º
Patent; THE REGENTS OF THE UNIVERSITY OF COLORADO, A BODY CORPORATE; YIN, Hang Hubert; ZHANG, Shuting; HU, Zhenyi; (114 pag.)WO2019/89648; (2019); A1;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

21905-86-2, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Cinnoline-4-carboxylic acid, cas is 21905-86-2,the cinnoline compound, it is a common compound, a new synthetic route is introduced below.

To a solution OF 4- [ (Z)- (4-BROMOPHENYL) (ethoxyimino) methyl]-1- (4-methyl-4- piperidinyl) piperidine (50 mg, 0.12 MMOL), cinnoline-4-carboxylic acid (25mg, 0.14 mmol), Et3N (0.06 mL, 0.43 MMOL) in DMF (3 mL, anhydrous) was added HATU (60mg, 0. 16MMOL) at room temperature. After 16 h the reaction mixture was poured into ice water, and the solid was collected by filtration. The solid was dissolved in CH2CI2, and dried over NA2SO4. Concentration in vacuo, and purification by preparative TLC (CH2CI2-MEOH, 9: 1) afforded the title compound as a light yellow powder. MS: 564 (M+).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of Cinnoline-4-carboxylic acid, 21905-86-2

Reference£º
Patent; SCHERING AKTIENGESELLSCHAFT; WO2004/113323; (2004); A1;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

A common heterocyclic compound, 78593-33-6,3-Bromocinnoline, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 78593-33-6

Starting material 1-A (11.8 g, 40 mmol), starting material 1-B (16.7 g, 80 mmol), CuI (3.8 g, 20 mmol), potassium carbonate (11.1 g, 80 mmol), and 1-methyl-1H-imidazole (3.3 g, 40 mmol) were added to 250 ml of toluene, and then, the mixture was refluxed while stirring under a nitrogen atmosphere for 7 days. Then, the reaction mixture was cooled to room temperature, 300 ml of water was added to isolate the organic layer, and the water layer was extracted twice with 250 ml of dichloromethane. The extracted organic layer was stirred with MgSO4 to remove water therefrom, and the organic layer was filtered and evaporated under reduced pressure. The resulting solid was subjected to column chromatography using, as an eluent, dichloromethane and normal hexane to obtain 5.6 g of Intermediate 1-C at the yield of 33%. MS (MALDI-TOF) m/z: 424 [M]+

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,78593-33-6,3-Bromocinnoline,its application will become more common.

Reference£º
Patent; SAMSUNG DISPLAY CO., LTD.; Kim, Myeongsuk; Ye, Jimyoung; Yoo, Byeongwook; Cho, Illhun; Kang, Sunwoo; Kim, Sunjae; Jeong, Jaeho; (112 pag.)US2020/99001; (2020); A1;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

A common heterocyclic compound, 318276-74-3,Methyl cinnoline-6-carboxylate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 318276-74-3

A solution of the compound from example 3d) (345 mg; 1.8 mmol.) in anhydrous tetrahydrofuran (20.0 mL) was cooled to 5 oC for the portionwise addition of solid lithium aluminumhydride (70.0 mg; 1.8 mmol.) and stirred at 5 0C for 1 h. The mixture was quenched by the addition of ethyl acetate (50.0 mL) then water (5.0 mL), filtered through a pad of Celite and evaporated. The residue was dissolved in ethyl acetate (50.0 mL) and treated with manganese dioxide (0.50 g) and stirred at room temperature for 2 h. The mixture was filtered through a pad of Celite and evaporated to afford the title EPO compound (169 mg; 60%) as a brown powder which was used directly in the following step without further purification,

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,Methyl cinnoline-6-carboxylate,318276-74-3,its application will become more common.

Reference£º
Patent; SMITHKLINE BEECHAM CORPORATION; WO2007/38331; (2007); A2;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

78593-33-6 A common heterocyclic compound, 78593-33-6,3-Bromocinnoline, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

a) 3-(4-Hydroxybenzenesulphonyl)cinnoline A mixture of 2.1 g (0.01 mol) of 3-bromocinnoline, 6.6 g (0.02 mol) of sodium 4-tosyloxybenzenesulphinate and 50 ml of dimethylsulphoxide was stirred and heated at 120 C. for 24 hours. The mixture was poured into water and extracted with dichloroethane. The dichloroethane solution was washed with water, dried on anhydrous sodium sulphate and filtered. The solvent was then evaporated with a rotatory evaporator to provide 2.5 g of an oily residue. The desired product was then isolated by chromatography on a silica column using dichlorethane/methanol 98/2. In this manner, 0.45 g of 3-(4-hydroxybenzenesulphonyl)cinnoline was obtained. Yield: 10.2%

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,3-Bromocinnoline,78593-33-6,its application will become more common.

Reference£º
Patent; Sanofi; US5147878; (1992); A;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

A common heterocyclic compound, 21905-86-2,Cinnoline-4-carboxylic acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 21905-86-2

10764] To a stirred solution of N1-cyclopropyl-5-fluo- robenzene-1,2-diamine mt-i (500 mg, 3.01 mmol) in DMF (5 mE) under an inert atmosphere was added cinnoline-4- carboxylic acid (524 mg, 3.01 mmol), HATU (1.71 g, 4.51 mmol) and diisopropylethylamine (1 mE, 6.02 mmol) at 00 C. The reaction mixture was stirred at room temperature for 16 h. Afier consumption of starting material (by TEC), the reaction mixture was diluted with water (20 mE) and extracted with EtOAc (2×20 mE). The combined organic extracts were washed with water (20 mE), dried over anhydrous Na2SO4 and concentrated under reduced pressure to obtain N-(2-(cyclopropylamino)-4-fluorophenyl) cinnoline4-carboxamide (500 mg, crude) as brown solid used in the next step without further purification.10765] EC-MS: m/z 322.9 [M+H] at 2.71 RT (38.30% purity).

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,21905-86-2,Cinnoline-4-carboxylic acid,its application will become more common.

Reference£º
Patent; Viamet Pharmaceuticals (NC), Inc.; Sparks, Steven; Yates, Christopher M.; Shaver, Sammy R.; Hoekstra, William J.; (156 pag.)US2018/185362; (2018); A1;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

A common heterocyclic compound, 21905-86-2,Cinnoline-4-carboxylic acid, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 21905-86-2

EXAMPLE 42 2-(2-ethoxyethoxy)ethyl cinnoline-4-carboxylate (42) 1.07 g of CDIT was added to a mixture of 1.04 g of 1 in 70 ml of dry THF under nitrogen, the mixture was stirred at room temperature for 4 hours, 1.6 g of 2-(2-ethoxyethoxy)ethanol and 0.032 g of sodium methoxide were added and the mixture was stirred at room temperature over a weekend. Then the solvent was stripped, and the residue was dissolved in methylene chloride. The solution was washed with water, dried (MgSO4) and stripped of solvent. The residue was flash-chromatographed on silica gel, using a 1:4 v:v mixture of ethyl acetate and methylene chloride as eluent, to give 42, as a yellow oil., 21905-86-2

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,Cinnoline-4-carboxylic acid,21905-86-2,its application will become more common.

Reference£º
Patent; E. I. Du Pont de Nemours and Company; US4699651; (1987); A;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

A common heterocyclic compound, 78593-33-6,3-Bromocinnoline, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route. 78593-33-6

(a) 3-(4-Hydroxybenzenesulphonyl)cinnoline A mixture of 2.1 g (0.01 mol) of 3-bromocinnoline, 6.6 g (0.02 mol) of sodium 4-tosyloxybenzenesulphinate and 50 ml of dimethylsulphoxide was stirred and heated at 120 C. for 24 hours. The mixture was poured into water and extracted with dichloroethane. The dichloroethane solution was washed with water, dried on anhydrous sodium sulphate and filtered. The solvent was then evaporated with a rotatory evaporator to provide 2.5 g of an oily residue. The desired product was then isolated by chromatography on a silica column using dichlorethane/methanol 98/2. In this manner, 0.45 g of 3-(4-hydroxybenzenesulphonyl)cinnoline was obtained. Yield: 10.2%

This compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,78593-33-6,3-Bromocinnoline,its application will become more common.

Reference£º
Patent; Sanofi; US4994474; (1991); A;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics