Category: cinnoline

78593-33-6, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.”78593-33-6

Using the same procedure as that described above but from 3-bromocinnoline there was obtained 3-(4-methoxyphenylthio)cinnoline Yield: 74.6% M.P.: 108 C. (isopropanol)

The chemical industry reduces the impact on the environment during synthesis, 78593-33-6, , I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Sanofi; US5147878; (1992); A;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.78593-33-6, 3-Bromocinnoline it is a common compound, a new synthetic route is introduced below.78593-33-6

Using the same procedure as that described above but from 3-bromocinnoline there was obtained 3-(4-methoxyphenylthio)cinnoline Yield: 74.6% M.P.: 108 C. (isopropanol)

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand 3-Bromocinnoline reaction routes.

Reference£º
Patent; Sanofi; US4994474; (1991); A;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.21905-86-2, Cinnoline-4-carboxylic acid it is a common compound, a new synthetic route is introduced below.21905-86-2

EXAMPLE 5 n-Propyl Cinnoline-4-carboxylate (5) A suspension of 870 mg of 1, and 850 mg of carbonyidimidazole (CDII) in 30 ml of tetrahydrofuran (THF) was stirred at room temperature until CO2 evolution ceased (ca. 30 minutes). After being stirred for 2 hours, the resulting mixture was treated with 320 mg of dry nypropanol and 3 drops of a 0.1 M solution of sodium imidazole in THE. The mixture was held at room temperature overnight, then the solvent was evaporated and the residue was partitioned between water and ether. The etheral extract was washed with saturated sodium bicarbonate solution, then with brine, then dried (MgSO4) and stripped in a rotary evaporator. The residue was chromatographed over silica gel, using a 1:1 v:v mixture of cyclohexane and ethyl acetate as eluent, to give 5, as a yellow oil.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand Cinnoline-4-carboxylic acid reaction routes.

Reference£º
Patent; E. I. Du Pont de Nemours and Company; US4699651; (1987); A;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.78593-33-6, 3-Bromocinnoline it is a common compound, a new synthetic route is introduced below.78593-33-6

Starting material 1-A (11.8 g, 40 mmol), starting material 1-B (16.7 g, 80 mmol), CuI (3.8 g, 20 mmol), potassium carbonate (11.1 g, 80 mmol), and 1-methyl-1H-imidazole (3.3 g, 40 mmol) were added to 250 ml of toluene, and then, the mixture was refluxed while stirring under a nitrogen atmosphere for 7 days. Then, the reaction mixture was cooled to room temperature, 300 ml of water was added to isolate the organic layer, and the water layer was extracted twice with 250 ml of dichloromethane. The extracted organic layer was stirred with MgSO4 to remove water therefrom, and the organic layer was filtered and evaporated under reduced pressure. The resulting solid was subjected to column chromatography using, as an eluent, dichloromethane and normal hexane to obtain 5.6 g of Intermediate 1-C at the yield of 33%. MS (MALDI-TOF) m/z: 424 [M]+

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand 3-Bromocinnoline reaction routes.

Reference£º
Patent; SAMSUNG DISPLAY CO., LTD.; Kim, Myeongsuk; Ye, Jimyoung; Yoo, Byeongwook; Cho, Illhun; Kang, Sunwoo; Kim, Sunjae; Jeong, Jaeho; (112 pag.)US2020/99001; (2020); A1;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

78593-33-6, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.”78593-33-6

Using the same procedure as that described above but from 3-bromocinnoline there was obtained 3-(4-methoxyphenylthio)cinnoline Yield: 74.6% M.P.: 108 C. (isopropanol)

The chemical industry reduces the impact on the environment during synthesis, 78593-33-6, , I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Sanofi; US5147878; (1992); A;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

Cinnoline-4-carboxylic acid, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.”21905-86-2

10764] To a stirred solution of N1-cyclopropyl-5-fluo- robenzene-1,2-diamine mt-i (500 mg, 3.01 mmol) in DMF (5 mE) under an inert atmosphere was added cinnoline-4- carboxylic acid (524 mg, 3.01 mmol), HATU (1.71 g, 4.51 mmol) and diisopropylethylamine (1 mE, 6.02 mmol) at 00 C. The reaction mixture was stirred at room temperature for 16 h. Afier consumption of starting material (by TEC), the reaction mixture was diluted with water (20 mE) and extracted with EtOAc (2×20 mE). The combined organic extracts were washed with water (20 mE), dried over anhydrous Na2SO4 and concentrated under reduced pressure to obtain N-(2-(cyclopropylamino)-4-fluorophenyl) cinnoline4-carboxamide (500 mg, crude) as brown solid used in the next step without further purification.10765] EC-MS: m/z 322.9 [M+H] at 2.71 RT (38.30% purity).

The chemical industry reduces the impact on the environment during synthesis, Cinnoline-4-carboxylic acid, , I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Viamet Pharmaceuticals (NC), Inc.; Sparks, Steven; Yates, Christopher M.; Shaver, Sammy R.; Hoekstra, William J.; (156 pag.)US2018/185362; (2018); A1;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

Cinnolin-4(1H)-one, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.”18514-84-6

Intermediate 2: Preparation of 3-Bromo-l,4-dihydro-4-cinnolinone:Bromine (0.8 ml) in acetic acid (10 ml) was added to a mixture of cinnolin-4- one (1.5 g, 10.27 mmol), sodium acetate (1.51 g, 18.49 mmol) and acetic acid (15 ml) maintained at 100 0C and stirred at that temperature for Ih. The mixture was concentrated under reduced pressure to half the initial volume and poured into water. The precipitated solid was filtered, washed with water and dried under reduced pressure. Yield: 64%. 1H-NMR (delta ppm, CDCl3, 300 MHz): 13.87 (br. s, IH); 8.06 (d, J = 7.8, IH); 7.84-7.80 (m, IH); 7.61 (d, J = 8.7, IH); 7.49 (t, J = 7.8, IH).

The chemical industry reduces the impact on the environment during synthesis, Cinnolin-4(1H)-one, , I believe this compound will play a more active role in future production and life.

Reference£º
Patent; GLENMARK PHARMACEUTICALS, S.A.; WO2009/53799; (2009); A1;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.78593-33-6, 3-Bromocinnoline it is a common compound, a new synthetic route is introduced below.78593-33-6

(a) 3-(4-Hydroxybenzenesulphonyl)cinnoline A mixture of 2.1 g (0.01 mol) of 3-bromocinnoline, 6.6 g (0.02 mol) of sodium 4-tosyloxybenzenesulphinate and 50 ml of dimethylsulphoxide was stirred and heated at 120 C. for 24 hours. The mixture was poured into water and extracted with dichloroethane. The dichloroethane solution was washed with water, dried on anhydrous sodium sulphate and filtered. The solvent was then evaporated with a rotatory evaporator to provide 2.5 g of an oily residue. The desired product was then isolated by chromatography on a silica column using dichlorethane/methanol 98/2. In this manner, 0.45 g of 3-(4-hydroxybenzenesulphonyl)cinnoline was obtained. Yield: 10.2%.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand 3-Bromocinnoline reaction routes.

Reference£º
Patent; Sanofi; US5017579; (1991); A;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.875-66-1, Cinnolin-4-ol it is a common compound, a new synthetic route is introduced below.875-66-1

To a suspension of NaH (60% in mineral oil, 0.099 g, 2.46 mmol) in DMF (5 mL) was added cinnolin-4-ol (prepared from 2-aminoacetophenone according to the procedures described in U. S. Patent No. 4,620, 000), 0. 300 g, 2.05 mmol) in DMF (2 mL) dropwise. The reaction mixture was warmed at 40 C and stirred for 30 minutes. After cooling, N-phenyltrifluoromethanesulfonimide (0.880 g, 2.46 mmol) in DMF (2 mL) was added, and the reaction mixture was stirred at room temperature for 1 hour. 1-Boc piperazine (0.765 g, 4.11 mmol) was added to the mixture. The reaction was stirred at 80 C for 4 hours. After cooling, the mixture was partitioned between EtOAc and water. The aqueous phase was extracted with EtOAc. The combined organic layers were washed with water, brine, dried and concentrated. The residue was purified by column chromatography (1: 1 to 1: 3 hexanes/EtOAc) to give 4- Cinnolin-4-yl-piperazine-l-carboxylic acid tert-butyl ester (0.246 g, 38%) as a yellow oil. 1H NMR (CDC13, 400 MHz) 8 8. 91 (s, 1H), 8. 47 (d, J= 8.4 Hz, 1H), 7.97 (d, J= 8. 4 Hz, 1H), 7.80 (t, J= 7.2 Hz, 1H), 7.69 (t, J= 7.2 Hz, 1H), 3.74 (m, 4H), 3. 34 (m, 4H), 1.51 (s, 9H). LCMS (APCI+) tnlz 315 [M+H]’ ; Rt = 2.14 minutes.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand Cinnolin-4-ol reaction routes.

Reference£º
Patent; ARRAY BIOPHARMA INC.; WO2005/51304; (2005); A2;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

3-Bromocinnoline, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.”78593-33-6

Using the same procedure as that described above but from 3-bromocinnoline there was obtained 3-(4-methoxyphenylthio)cinnoline Yield: 74.6% M.P.: 108 C. (isopropanol)

The chemical industry reduces the impact on the environment during synthesis, 3-Bromocinnoline, , I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Sanofi; US4994474; (1991); A;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics