Category: cinnoline

Cinnolin-4-ol, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.”875-66-1

Example 20: Synthesis of 1- [4- (5-FLUORO-2-METHOXYPHENYL)-2-HYDROXY-4-METHYL-2- TRIFLUOROMETHYLPENTYL]-LH-CINNOLIN-4-ONE To a suspension of 2- [2- (5-fluoro-2-methoxyphenyl)-2-methylpropyl]-2-trifluoromethyloxirane (216 mg) and cinnolin-4-ol (V. G. Chapoulaud et AL., Tetrahedron, 2000,56, pp. 5499-5507) (216 mg) in anhydrous ethanol (1.2 ML) was added sodium ethoxide (21 wt. % solution in ethanol, 276 PL). After heating at 85C for 16 hours, the reaction mixture was diluted with ethyl acetate, dried over sodium sulfate, filtered, and concentrated in vacuo. The residue was purified by preparative TLC (eluted with 40% ethyl acetate-hexanes) to give the title compound as a pale yellow solid (26 mg), m. p. 122C-123C.

The chemical industry reduces the impact on the environment during synthesis, Cinnolin-4-ol, , I believe this compound will play a more active role in future production and life.

Reference£º
Patent; BOEHRINGER INGELHEIM PHARMACEUTICALS, INC.; WO2004/63163; (2004); A1;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.318276-74-3, Methyl cinnoline-6-carboxylate it is a common compound, a new synthetic route is introduced below.318276-74-3

A solution of the compound from example 3d) (345 mg; 1.8 mmol.) in anhydrous tetrahydrofuran (20.0 ml_) was cooled to 5 oC for the portionwise addition of solid lithium aluminumhydride (70.0 mg; 1.8 mmol.) and stirred at 5 0C for 1 h. The mixture was quenched by the addition of ethyl acetate (50.0 ml_) then water (5.0 ml_), filtered through a pad of Celite and evaporated. The residue was dissolved in ethyl acetate (50.0 ml.) and treated with manganese dioxide (0.50 g) and stirred at room temperature for 2 h. The mixture was filtered through a pad of Celite and evaporated to afford the title compound (169 mg; 60%) as a brown powder which was used directly in the following step without further purification

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand Methyl cinnoline-6-carboxylate reaction routes.

Reference£º
Patent; SMITHKLINE BEECHAM CORPORATION; WO2007/103759; (2007); A2;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.318276-74-3, Methyl cinnoline-6-carboxylate it is a common compound, a new synthetic route is introduced below.318276-74-3

A solution of the compound from example 3d) (345 mg; 1.8 mmol.) in anhydrous tetrahydrofuran (20.0 mL) was cooled to 5 oC for the portionwise addition of solid lithium aluminumhydride (70.0 mg; 1.8 mmol.) and stirred at 5 0C for 1 h. The mixture was quenched by the addition of ethyl acetate (50.0 mL) then water (5.0 mL), filtered through a pad of Celite and evaporated. The residue was dissolved in ethyl acetate (50.0 mL) and treated with manganese dioxide (0.50 g) and stirred at room temperature for 2 h. The mixture was filtered through a pad of Celite and evaporated to afford the title EPO compound (169 mg; 60%) as a brown powder which was used directly in the following step without further purification,

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand Methyl cinnoline-6-carboxylate reaction routes.

Reference£º
Patent; SMITHKLINE BEECHAM CORPORATION; WO2007/38331; (2007); A2;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

3-Bromocinnoline, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.”78593-33-6

(a) 3-(4-Hydroxybenzenesulphonyl)cinnoline A mixture of 2.1 g (0.01 mol) of 3-bromocinnoline, 6.6 g (0.02 mol) of sodium 4-tosyloxybenzenesulphinate and 50ml of dimethylsulphoxide was stirred and heated at -20 C. for 24 hours. The mixture was poured into water and extracted with dichloroethane. The dichloroethane solution was washed with water, dried on anhydrous sodium sulphate and filtered. The solvent was then evaporated with a rotatory evaporator to provide 2.5 g of an oily residue. The desired product was then isolated by chromatography on a silica column using dichlorethane/methanol 98/2. In this manner, 0.45 g of 3-(4-hydroxybenzenesulphonyl)cinnoline was obtained. Yield 10.2%

The chemical industry reduces the impact on the environment during synthesis, 3-Bromocinnoline, , I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Sanofi; US4957925; (1990); A;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

78593-33-6, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.”78593-33-6

78593-33-6, Using the same procedure as that described above but from 3-bromocinnoline there was obtained 3-(4-methoxyphenylthio)cinnoline Yield: 74.6% M.P.: 108 C. (isopropanol)

The chemical industry reduces the impact on the environment during synthesis, 78593-33-6, , I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Sanofi; US5147878; (1992); A;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.21905-86-2, Cinnoline-4-carboxylic acid it is a common compound, a new synthetic route is introduced below.21905-86-2

EXAMPLE 5 n-Propyl Cinnoline-4-carboxylate (5) A suspension of 870 mg of 1, and 850 mg of carbonyidimidazole (CDII) in 30 ml of tetrahydrofuran (THF) was stirred at room temperature until CO2 evolution ceased (ca. 30 minutes). After being stirred for 2 hours, the resulting mixture was treated with 320 mg of dry nypropanol and 3 drops of a 0.1 M solution of sodium imidazole in THE. The mixture was held at room temperature overnight, then the solvent was evaporated and the residue was partitioned between water and ether. The etheral extract was washed with saturated sodium bicarbonate solution, then with brine, then dried (MgSO4) and stripped in a rotary evaporator. The residue was chromatographed over silica gel, using a 1:1 v:v mixture of cyclohexane and ethyl acetate as eluent, to give 5, as a yellow oil.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand Cinnoline-4-carboxylic acid reaction routes.

Reference£º
Patent; E. I. Du Pont de Nemours and Company; US4699651; (1987); A;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

Cinnoline-4-carboxylic acid, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.”21905-86-2

To a solution OF 4- [ (Z)- (4-BROMOPHENYL) (ethoxyimino) methyl]-1- (4-methyl-4- piperidinyl) piperidine (50 mg, 0.12 MMOL), cinnoline-4-carboxylic acid (25mg, 0.14 mmol), Et3N (0.06 mL, 0.43 MMOL) in DMF (3 mL, anhydrous) was added HATU (60mg, 0. 16MMOL) at room temperature. After 16 h the reaction mixture was poured into ice water, and the solid was collected by filtration. The solid was dissolved in CH2CI2, and dried over NA2SO4. Concentration in vacuo, and purification by preparative TLC (CH2CI2-MEOH, 9: 1) afforded the title compound as a light yellow powder. MS: 564 (M+).

The chemical industry reduces the impact on the environment during synthesis, Cinnoline-4-carboxylic acid, , I believe this compound will play a more active role in future production and life.

Reference£º
Patent; SCHERING AKTIENGESELLSCHAFT; WO2004/113323; (2004); A1;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.38024-35-0, 4-Aminocinnoline-3-carboxamide it is a common compound, a new synthetic route is introduced below.38024-35-0

To a suspension of 4-aminocinnoline-3-carboxamide (3.5 g, 18.60 mmol) in DCM (10 ml) was added POCI3 (43.3 ml, 465 mmol) followed by triethylamine (7.78 ml, 55.8 mmol). The mixture was refluxed for 7 h. The reaction was then allowed to cool to 11 and conc, in vacuo. The crude residuewas then carefully treated with saturated aqueous NaHCO3 at 0 C. A precipitate formed which was collected via vacuum filtration. The filter cake washed with water (-i00 ml,), collected, and driedvacuo to provide the title compound as a grey solid 4-aminocinnoiine-3-carbonitriie.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand 4-Aminocinnoline-3-carboxamide reaction routes.

Reference£º
Patent; PI INDUSTRIES LTD.; SAXENA, Rohit; PANMAND, Deepak Shankar; JENA, Lalit Kumar; SRIVASTAVA, Khushboo; RAJU, Jella Rama; MANJUNATHA, Sulur G; SAMANTA, Jatin; GARG, Ruchi; AUTKAR, Santosh Shridhar; VENKATESHA, Hagalavadi M; GADAKH, Ramdas Balu; KLAUSENER, Alexander G. M.; POSCHARNY, Konstantin; (219 pag.)WO2018/116072; (2018); A1;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

78593-33-6, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.”78593-33-6

(a) 3-(4-Hydroxybenzenesulphonyl)cinnoline A mixture of 2.1 g (0.01 mol) of 3-bromocinnoline, 6.6 g (0.02 mol) of sodium 4-tosyloxybenzenesulphinate and 50 ml of dimethylsulphoxide was stirred and heated at 120 C. for 24 hours. The mixture was poured into water and extracted with dichloroethane. The dichloroethane solution was washed with water, dried on anhydrous sodium sulphate and filtered. The solvent was then evaporated with a rotatory evaporator to provide 2.5 g of an oily residue. The desired product was then isolated by chromatography on a silica column using dichlorethane/methanol 98/2. In this manner, 0.45 g of 3-(4-hydroxybenzenesulphonyl)cinnoline was obtained. Yield: 10.2%.

The chemical industry reduces the impact on the environment during synthesis, 78593-33-6, , I believe this compound will play a more active role in future production and life.

Reference£º
Patent; Sanofi; US5017579; (1991); A;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics

21905-86-2, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.”21905-86-2

EXAMPLE 42 2-(2-ethoxyethoxy)ethyl cinnoline-4-carboxylate (42) 1.07 g of CDIT was added to a mixture of 1.04 g of 1 in 70 ml of dry THF under nitrogen, the mixture was stirred at room temperature for 4 hours, 1.6 g of 2-(2-ethoxyethoxy)ethanol and 0.032 g of sodium methoxide were added and the mixture was stirred at room temperature over a weekend. Then the solvent was stripped, and the residue was dissolved in methylene chloride. The solution was washed with water, dried (MgSO4) and stripped of solvent. The residue was flash-chromatographed on silica gel, using a 1:4 v:v mixture of ethyl acetate and methylene chloride as eluent, to give 42, as a yellow oil.

The chemical industry reduces the impact on the environment during synthesis, 21905-86-2, , I believe this compound will play a more active role in future production and life.

Reference£º
Patent; E. I. Du Pont de Nemours and Company; US4699651; (1987); A;,
Cinnoline – Wikipedia
Cinnoline – an overview | ScienceDirect Topics